Hawk Performance® DTC-60 Front or Rear Brake Pads fits 1990-2017 Dodge Viper, Ferrari F40, F50, Jaguar XJR, XKR, Vanden Plas HB193G.670

Hawk Performance® HB193G.670 DTC-60 Motorsports brake pads, front or rear (position varies by vehicle), HB193 shape, 0.670 in. (17 mm) thick, supplied as one axle set (2-wheel set), for the 1990-2017 Dodge Viper, Ferrari F40, Ferrari F50, Jaguar Vanden Plas, Jaguar XJR and Jaguar XKR (per-model years below).

IMPORTANT: Hawk Performance® lists this part for: Dodge Viper (2003-2006, 2008-2010, 2015-2017); Ferrari F40 (1990-1992); Ferrari F50 (1995); Jaguar Vanden Plas (2002-2003); Jaguar XJR (1997, 2002-2003); Jaguar XKR (2002-2006). Trims, engines and brake or equipment limits are in the fitment table below. Position varies by vehicle: this shape is a front pad on some vehicles and a rear pad on others, so check the Position column in the fitment table for your vehicle. Fitment is limited to the vehicles, trims and conditions Hawk Performance® lists; a trim or package not shown is not listed for this part. Where Hawk Performance® lists a model year without a trim, the table shows “Not specified”; compare your existing pads with the HB193 shape (5.18 in. (132 mm) x 2.64 in. (67 mm)) before ordering. The Hawk Performance® Specialty Caliper Guide also matches this pad to these aftermarket calipers: Brembo 20.8643.23/28/29, Brembo 20.8644.10/22/23, Brembo F-40, Brembo Caliper Family B, Brembo Caliper Family H, Brembo Caliper Family P, Rotora FC4. All Hawk Performance® compounds are not compatible with carbon ceramic rotors; Hawk Performance® pads are designed to work with iron/metal rotors. Notes beginning “OE Incl.” are vehicle identifiers that describe the original equipment, not the contents of this box. Other Hawk Performance® compounds in the HB193 shape sold by TotalZParts: HB193B.670 (HPS 5.0, high performance street); HB193N.670 (HP Plus (HP+), crossover street/race for track day and autocross); HB193Z.670 (Performance Ceramic, quiet low-dust street). This listing is for the DTC-60 compound (code G) only. Contents: One axle set of brake pads (2-wheel set). Hardware, clips, shims and wear sensors are not listed as included.

DTC-60 is a Hawk Performance® Motorsports brake pad compound designed for extremely high deceleration rates and increased downforce. Hawk Performance® recommends it with DTC-70 when split friction between axles is desired, and lists excellent modulation and release characteristics.

Hawk Performance® lists superior release and torque control, very low abrasive rotor wear and high torque, and notes DTC-60 is a popular choice on lightweight front axle applications, with or without ABS. Listed applications are NASCAR/NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2/Pro 4 Off Road Trucks/Pro Lite, Sports Car/GT/GS and Open Wheel/Formula. DTC-60 runs at a 700-1100 F optimal temperature range with 400-1600 F operating temperatures.

The HB193 backing plate shape measures 5.18 in. (132 mm) x 2.64 in. (67 mm), with a total pad thickness of 0.670 in. (17 mm) including core and friction material. Hawk Performance® pads are designed to work with iron/metal rotors only, and proper bed-in per the Hawk Performance® installation and bed-in procedure is required for best performance. Warranty: Hawk Performance® Limited Lifetime Warranty against defects in workmanship and materials. The warranty does not cover normal wear. Warranty claims are processed through Hawk Performance®.

Features

• Fits (front or rear by vehicle): Dodge Viper (2003-2006, 2008-2010, 2015-2017); Ferrari F40 (1990-1992); Ferrari F50 (1995); Jaguar Vanden Plas (2002-2003); Jaguar XJR (1997, 2002-2003); Jaguar XKR (2002-2006)
• Also matches these aftermarket calipers (Hawk Performance® Specialty Caliper Guide): Brembo 20.8643.23/28/29, Brembo 20.8644.10/22/23, Brembo F-40, Brembo Caliper Family B, Brembo Caliper Family H, Brembo Caliper Family P, Rotora FC4
• DTC-60 compound, compound code G: Hawk Performance® Motorsports brake pad
• Designed for extremely high deceleration rates and increased downforce; high torque
• Superior release and torque control; excellent modulation and release characteristics
• Very low abrasive rotor wear
• Popular on lightweight front axle applications, with or without ABS; pairs with DTC-70 for split friction between axles
• Applications listed by Hawk Performance®: NASCAR/NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2/Pro 4 Off Road Trucks/Pro Lite, Sports Car/GT/GS and Open Wheel/Formula
• 700-1100 F optimal, 400-1600 F operating
• Position: Front or rear, varies by vehicle (see fitment table)
• Pad shape HB193, 0.670 in. (17 mm) thick, FMSI D810 (also: D968)
• All Hawk Performance® compounds are not compatible with carbon ceramic rotors; designed for iron/metal rotors
• Kit contents: One axle set of brake pads (2-wheel set). Hardware, clips, shims and wear sensors are not listed as included.
• Hawk Performance® Limited Lifetime Warranty against defects in workmanship and materials (excludes normal wear)
• Sold as one axle set (2-wheel set)

Specifications

Fitment

Years show the model years Hawk Performance® lists for each entry. “Not specified” means Hawk Performance® lists no trim or engine for that entry. “None listed” means no brake or equipment limit is listed.

Fitment: Front or rear (by vehicle) pads in the HB193 shape for the 1990-2017 vehicles listed by Hawk Performance®, with trims, engines and limits in the table above. This is the DTC-60 compound, HB193G.670. Other compounds in the same shape: HB193B.670, HB193N.670, HB193Z.670. Check the part number, pad thickness and position before ordering.