SCT® BDX 40490 Programmer Tuner 2011-2019 Ford F-150 5.0L V8
SCT BDX 40490 Programmer Tuner for 2011-2018 Ford F-150, 5.0L V8
SCT BDX 40490 Programmer Tuner for 2011-2018 Ford F-150, 5.0L V8
SCT® BDX™ Tuner 40490 (17-20 F150 Raptor)
 

SCT® BDX 40490 Programmer Tuner 2011-2019 Ford F-150 5.0L V8

$399.00

Free Shipping
Best Price Guarantee

  • Monitor Engine Temps
  • Includes Pre-loaded Tunes

Sold out

Notify me when in stock


SKU: 40490-FV8 Categories: | | | | | Tags: ,

Description

SCT Performance®  BDX™ for 2011-2019 Ford F-150 Trucks with a 5.0L V8. Unleash some power gains with one of the 3 included pre-loaded tunes (87 octane, 91 octane, and 93 octane).  Every F150’s PCM comes with limitations on horsepower, torque, top speed limit, rev limit and other caps put in place by the vehicle manufacturer. The BDX will allow you to unlock extra power and capability by writing an enhanced program to your vehicle’s computer. SCT carefully designs their pre-loaded tunes for maximum power and efficiency, giving you more opportunity to utilize the maximum capabilities of your F-150’s engine and drivetrain.  Adjustable parameters vary based on model year (see below).

Pre-loaded with ready-to-use tunes for vehicles listed below, unless otherwise specified.

PEAK PERFORMANCE GAINS (with 93 octane tune):
2018-2019 Ford F-150 5.0 V8: +52 HP +51 TQ
2015-2016 Ford F-150 5.0 V8: +24 HP +38 TQ
2017 Ford F-150 5.0 V8: +17 HP+21 TQ

Authorized SCT/Bully Dog Reseller.

What you can adjust:
Axle Ratio (2011-2014 5.0L)
Correct the vehicle speedometer (and fuel efficiency calculations) if you have changed the gear ratio on your vehicle. If no gear ration modifications have been made to the vehicle, then choose the stock setting when the tuner prompts you to choose a gear ratio. This will ensure that no modifications are made to the stock program.

Global Spark (2015-2017 5.0L)
Allows addition or removal of timing across all RPM ranges

Idle Adjust (2011-2017 5.0L)
Enable and select a value for Engine Idle position. This is a great feature for keeping voltage in the vehicle up while running auxiliary electronics off of the vehicle’s power system.

Intake Airbox (2011-2014 5.0L)
Allows an aftermarket intake to be run on the vehicle without a Check Engine Light. For Intake Kits that require tuning, this will provide a selection of available intake kits.

Rev Limiter (2011-2017 5.0L)
Regulate the highest RPM that an engine can reach before the engine is electronically limited. Increasing the RPM limit is recommended only for racing purposes. Once of the most important ways to protect your engine from damage is to keep the RPMs from going too high.

Speed Limiter (2011-2017 5.0L)
Change the top speed that the vehicle will reach before the engine automatically limits the power needed to go faster.

Tire Size (2011-2014 5.0L)
Correct the speedometer if you have changed your tire size from stock.

Torque Reduction (2011-2014 5.0L)
Reduce torque durning shifting (makes shift more firm)

TPMS (2011-2014 5.0L)
Change or disable the Tire Pressure Monitoring System.

Transmission Shift Firmness (2011-2014 5.0L)
Change the shift firmness of an automatic transmission.

Transmission Shift Points (2011-2014 5.0L)
Change the RPMs at which an automatic transmission will change gears.

Features:
Backs Up Factory Tune
Stores your vehicles factory tune file for easy restoration back to the stock program.

Built-In Wifi for easy updates
Built-in Wifi allows you to easily attach to your local area wireless network to download device updates.

Cloud Custom Tunes
Connect to Wi-Fi and your Custom Tuning Dealer can send Custom Tunes direct to your device over the cloud.

Data Logging
Need to monitor your vehicle’s engine parameters? No need for a separate monitoring device. View & record your vehicle’s PCM data on the device or on a PC.

Increases Horsepower & Torque!
Increases your vehicles Horsepower, Torque, Throttle Response and even Fuel Mileage

Installs Quickly & Easily
Installs quickly & easily via your vehicle’s OBDII port.

Monitor Engine Parameters
Monitor Engine Parameters in Real-Time via the Large Backlit LCD Screen

Monitoring
Need to monitor your vehicle’s engine parameters? No need for a separate monitoring device. View & record your vehicle’s PCM data on the device or on a PC.

Reads & Clears DTC Codes
Reads & Clears PCM Diagnostic Trouble Codes.

Stores 10 Custom Tunes
Stores up to 10 custom tune files created by your local Bully Dog Custom Tuning Dealer.

Features:
Dyno-Proven Performance
The BDX Performance Programmer delivers street-tested, dyno-proven tune files developed by SCT’s expert calibrators to unlock each vehicle’s true potential. Select from multiple SCT tuning levels or load up to 20 custom tune files from one of our thousands of custom tuning dealers worldwide. Instead of downloading and uploading tunes and DLX Files using a computer, BDX’s WiFi capability enables users to send and receive over the cloud. A variety of customizable vehicle functions from timing and rev limiter adjustments, to wheel and tire size calibration allow the BDX to adjust your vehicle to meet your performance needs.

Monitoring, Data Logging & Diagnostics
The lightning-fast BDX gives drivers the ability to monitor a customizable table of engine parameters (PIDs), in real time. The device gauges display in crisp, HD color for easy readability and with its data logging capability, users can easily record vehicle performance and play it back later with SCT’s free LiveLink software. DLX files can even be sent via WiFi connection to take a closer look at vehicle performance. The BDX also doubles as a diagnostic tool with the ability to read and clear diagnostic trouble codes (check engine lights) saving drivers a trip to the dealership.

CloudTune Custom Tune Delivery
The BDX offers the first-of-its-kind CloudTune delivery over WiFi. This innovation in the way firmware updates and custom tunes are delivered eliminates the need for computers or fumbling with messy wires. Instead of downloading and uploading tunes and DLX Files using a computer, BDX’s WiFi capability enables users to send and receive over the cloud. Drivers can receive tunes remotely via custom tune dealer, from anywhere in the world in just a few easy steps. Welcome to the new generation of tuning.

Backs Up Factory Tune
Stores your vehicles factory tune file for easy restoration back to the stock program.

Built-In Wifi for easy updates
Built-in Wifi allows you to easily attach to your local area wireless network to download device updates.

Cloud Custom Tunes
Connect to Wi-Fi and your Custom Tuning Dealer can send Custom Tunes direct to your device over the cloud.

Data Logging
Need to monitor your vehicle’s engine parameters? No need for a separate monitoring device. View & record your vehicle’s PCM data on the device or on a PC.

Increases Horsepower & Torque!
Increases your vehicles Horsepower, Torque, Throttle Response and even Fuel Mileage

Installs Quickly & Easily
Installs quickly & easily via your vehicle’s OBDII port.

Monitor Engine Parameters
Monitor Engine Parameters in Real-Time via the Large Backlit LCD Screen

Monitoring
Need to monitor your vehicle’s engine parameters? No need for a separate monitoring device. View & record your vehicle’s PCM data on the device or on a PC.

Reads & Clears DTC Codes
Reads & Clears PCM Diagnostic Trouble Codes.

Stores 10 Custom Tunes
Stores up to 10 custom tune files created by your local Bully Dog Custom Tuning Dealer.

**CANNOT BE SHIPPED TO CALIFORNIA.
**ILLEGAL FOR USE ON POLLUTION CONTROLLED VEHICLES IN THE STATE OF CALIFORNIA**

2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
ECM Flash Tuner

Additional information

Weight 2 lbs
Manufacturer

SCT

condition

New

Part Number

40490

gtin

681018404907

Make Model Year
Ford F150 2011 - 2019