Description
SCT BDX Performance Tuner for 2016-2019 Camaro SS (6.2L LT1), 2017-2018 Camaro ZL1 (6.2L LT4), 2010-2015 CAMARO (L99/LS3 6.2L), 2001-2002 Chevy CAMARO (5.7L LS1). Includes Pre-Loaded tunes. See below for power gains & specific adjustable options.
*Adjustable options vary between year, trim and engine/transmission.
*This tuner can disable the DOD (displacement on demand) feature on 2010-2015 Camaro SS with the L99 drivetrain (automatic transmission) & 2019 Camaro 6.2L LT1.
Power Gains:
2016 Chevrolet Camaro 6.2L LT1: +16 HP +28 TQ
2017-2018 Chevrolet Camaro 6.2L LT1: +20 HP +24 TQ
2019 Chevrolet Camaro 6.2L LT1: +21 HP +26 TQ
2017-2018 Chevrolet Camaro ZL1 6.2L; LT4: +35 HP +43 TQ
Authorized SCT/Bully Dog Reseller.
**CANNOT BE SHIPPED TO CALIFORNIA.
**ILLEGAL FOR USE ON POLLUTION CONTROLLED VEHICLES IN THE STATE OF CALIFORNIA**
Adjustable Options:
2010-2015 Camaro SS:
Axle Ratio
Correct the vehicle speedometer (and fuel efficiency calculations) if you have changed the gear ratio on your vehicle. If no gear ration modifications have been made to the vehicle, then choose the stock setting when the tuner prompts you to choose a gear ratio. This will ensure that no modifications are made to the stock program.
Disable DOD (only for L99 Automatic Transmission models)
Allows you to disable / enable the Displacement On Demand functions of your vehicles PCM.
Idle Adjust
Enable and select a value for Engine Idle position. This is a great feature for keeping voltage in the vehicle up while running auxiliary electronics off of the vehicle’s power system.
Speed Limiter
Change the top speed that the vehicle will reach before the engine automatically limits the power needed to go faster.
2016 Camaro SS LT1:
Axle Ratio
Correct the vehicle speedometer (and fuel efficiency calculations) if you have changed the gear ratio on your vehicle. If no gear ration modifications have been made to the vehicle, then choose the stock setting when the tuner prompts you to choose a gear ratio. This will ensure that no modifications are made to the stock program.
Fan Control
Lowers the Temperature at which the Fan turns on.
RPM Based Spark
Allows you to Add or Remove Timing by RPM Range. (0-2000)(2000-4000)(4000-8000)
Speed Limiter
Change the top speed that the vehicle will reach before the engine automatically limits the power needed to go faster.
2017-2019 Camaro SS LT1 & Camaro ZL1 (6.2L LT4):
Axle Ratio
Correct the vehicle speedometer (and fuel efficiency calculations) if you have changed the gear ratio on your vehicle. If no gear ration modifications have been made to the vehicle, then choose the stock setting when the tuner prompts you to choose a gear ratio. This will ensure that no modifications are made to the stock program.
Disable DOD (only available on 2019 model):
Allows you to disable / enable the Displacement On Demand functions of your vehicles PCM.
Intake Airbox
Allows an aftermarket intake to be run on the vehicle without a Check Engine Light. For Intake Kits that require tuning, this will provide a selection of available intake kits.
Speed Limiter
Change the top speed that the vehicle will reach before the engine automatically limits the power needed to go faster.
Tire Size
Correct the speedometer if you have changed your tire size from stock.
2001-2002 Camaro Z28 (5.7L LS1):
Axle Ratio
Correct the vehicle speedometer (and fuel efficiency calculations) if you have changed the gear ratio on your vehicle. If no gear ration modifications have been made to the vehicle, then choose the stock setting when the tuner prompts you to choose a gear ratio. This will ensure that no modifications are made to the stock program.
Rev Limiter
Regulate the highest RPM that an engine can reach before the engine is electronically limited. Increasing the RPM limit is recommended only for racing purposes. One of the most important ways to protect your engine from damage is to keep the RPMs from going too high.
RPM Based Spark
Allows you to Add or Remove Timing by RPM Range. (0-2000)(2000-4000)(4000-8000)
Speed Limiter
Change the top speed that the vehicle will reach before the engine automatically limits the power needed to go faster.
Transmission Shift Firmness
Change the shift firmness of an automatic transmission.
Transmission Shift Points
Change the RPMs at which an automatic transmission will change gears.
Features:
Dyno-Proven Performance
The BDX Performance Programmer delivers street-tested, dyno-proven tune files developed by SCT’s expert calibrators to unlock each vehicle’s true potential. Select from multiple SCT tuning levels or load up to 20 custom tune files from one of our thousands of custom tuning dealers worldwide. Instead of downloading and uploading tunes and DLX Files using a computer, BDX’s WiFi capability enables users to send and receive over the cloud. A variety of customizable vehicle functions from timing and rev limiter adjustments, to wheel and tire size calibration allow the BDX to adjust your vehicle to meet your performance needs.
Monitoring, Data Logging & Diagnostics
The lightning-fast BDX gives drivers the ability to monitor a customizable table of engine parameters (PIDs), in real time. The device gauges display in crisp, HD color for easy readability and with its data logging capability, users can easily record vehicle performance and play it back later with SCT’s free LiveLink software. DLX files can even be sent via WiFi connection to take a closer look at vehicle performance. The BDX also doubles as a diagnostic tool with the ability to read and clear diagnostic trouble codes (check engine lights) saving drivers a trip to the dealership.
CloudTune Custom Tune Delivery
The BDX offers the first-of-its-kind CloudTune delivery over WiFi. This innovation in the way firmware updates and custom tunes are delivered eliminates the need for computers or fumbling with messy wires. Instead of downloading and uploading tunes and DLX Files using a computer, BDX’s WiFi capability enables users to send and receive over the cloud. Drivers can receive tunes remotely via custom tune dealer, from anywhere in the world in just a few easy steps. Welcome to the new generation of tuning.
Backs Up Factory Tune
Stores your vehicles factory tune file for easy restoration back to the stock program.
Built-In Wifi for easy updates
Built-in Wifi allows you to easily attach to your local area wireless network to download device updates.
Cloud Custom Tunes
Connect to Wi-Fi and your Custom Tuning Dealer can send Custom Tunes direct to your device over the cloud.
Data Logging
Need to monitor your vehicle’s engine parameters? No need for a separate monitoring device. View & record your vehicle’s PCM data on the device or on a PC.
Increases Horsepower & Torque!
Increases your vehicles Horsepower, Torque, Throttle Response and even Fuel Mileage
Installs Quickly & Easily
Installs quickly & easily via your vehicle’s OBDII port.
Monitor Engine Parameters
Monitor Engine Parameters in Real-Time via the Large Backlit LCD Screen
Monitoring
Need to monitor your vehicle’s engine parameters? No need for a separate monitoring device. View & record your vehicle’s PCM data on the device or on a PC.
Reads & Clears DTC Codes
Reads & Clears PCM Diagnostic Trouble Codes.
Stores 10 Custom Tunes
Stores up to 10 custom tune files created by your local Bully Dog Custom Tuning Dealer.
2001, 2002, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019