Description
Mads Smarty S2G Touchscreen Power Programmer with EGT “Pyro” Sensor kit and Communication Module for 2010-2018 Dodge RAM Cummins 6.7L Turbo Diesel. The included EGT probe will allow you to accurately monitor exhaust gas temperatures to over 2200 Fahrenheit (°F). The ComMod is necessary for unlocking the ECM on 2013-2018 trucks, and enables shift-on-the-fly capabilities on 2010-2018 trucks. If you have a 2010-2012 Cummins and don’t need “shift on the fly”, you can purchase the S2G on its own or with the EGT probe only. Power level gains on the 2010-2018 Cummins range from +30HP to +170HP. Increase horsepower, torque, & optimize fuel economy by 2-4 miles per gallon/MPG. Pre-loaded with ready to use (for trucks with factory emissions equipment).
**CANNOT BE SHIPPED TO CALIFORNIA.
**PLEASE NOTE: The pre-loaded tunes are only designed for use with emissions present only trucks, and will not function if you have removed emissions components. If your truck’s engine and/or exhaust system differs significantly from the stock configuration, you will likely encounter issues when tuning (cold air intakes and filter back exhausts are generally fine). The factory Dodge program must also be on your truck’s computer, or this tuner may cause issues.
Smarty Touch features:
4,3″ Touch Display. Resolution 480 x 272 – 16.3 million colors.
Two devices: Smarty Touch Display and Smarty Touch Controller each with its own CPU. The Display for the graphics & user
interface and the controller for communicating with the ECM.
Twin CPU design. The fastest Display & Tuner on earth!
Fastest display start up in the industry. Just four seconds!
Fastest PID refresh speed in the industry.
Fastest ECM download in the industry, up to three times faster than the competition, a typical ECM update takes 1.5 to 6 minutes,
depending on the model year.
Small micro USB cable connecting the display and the controller for easy installation.
MicroSD card for simple and fast updates (included).
Fully Internet updateable. Updates are always FREE!
MicroSD card can store multiple UDC custom tunes.
Works with any MicroSD FAT file system formatted card.
EGT sensor (optional). Reads accurately up to over 2200°F.
Communication module (optional). Tunes real time parameters and unlocks the MY 2013+ ECMs.
UDC Pro RT software (optional). Customizing tune software with real time parameters. (Requires Communication module for real time
parameters programming)
Four dashboards, each configurable with five different gauge layouts.
For details about the dashboard layouts please click here.
Freely configurable gauge(s) range.
Two alarms (high and a low range) can be configured for each PID.
Audible and/or visible alarms can be configured.
Configured ranges are also displayed through colored bars in all digital gauges.
Configurable PID refresh speed.
Each gauge stores/updates and displays the max reached PID value continously.
Recorded max values can be reset at any time.
Customizeable display background.
Adjustable sound feedback for alarms.
Supports over 300 SAE and Proprietary PID’s.
Works on all Dodge Cummins Ram Pickup’s from 1998.5 to present.
CaTCHER software inside with ten power levels.
Selectable performance parameters for fine tuning.
Works with ours UDC and UDC Pro RT (Firmware 1.1.2 or recent is required) custom tuning software (for CR 5.9L and for 6.7L
trucks).
Can store multiple UDC and UDC Pro RT custom softwares on MicroSD card with dongle purchases. The only limit is the storage
space on the MicroSD card (for CR 5.9L trucks and 6.7L trucks).
ABS tire height updates in just seconds.
Cold weather 3 Cylinder High Idle enabled for 1998.5 – 2002 VP 5.9L trucks.
Not traceable in the stock setting. Smarty Touch leaves no footprint in all 5.9L trucks.
Manual High Idle is enabled in all softwares for CR 5.9L trucks (excluded MY 2003).
Reads Diagnostic Trouble Codes in plain text.
Clears DTC’s.
Reliable, it works off your OEM hardware.
Programmable Speed Limiter from 25 to 250 mph.
TNT-R and SSR software for CR 5.9L trucks (Requires unlock code).
RPM and Shift limiters unlocked with TNT-R and SSR softwares.
Power on Demand “PoD” for CR 5.9L and 2007 – 2009 6.7L trucks.
Real time tuning parameters, while engine is running, for CR 6.7L 2010+ trucks (Requires Communication module)
1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018