Front adjustable upper control arms for 01-07 Toyota Sequoia, 2000-06 Tundra. 0° to +4° of caster and ±2° of camber. Designed to maintain factory ride quality while giving you improved clearance and maximum droop travel.
2001-2007 Toyota Sequoia
2000-2006 Toyota Tundra
25485 – TOYOTA LIGHT TRUCK
Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC’s adjustable front upper control arms. Featuring an upgraded greaseable ball joint and SpecRide™ bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC’s integrated tubular and cast steel designs provide the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.
Get more droop travel: SPC’s arm has improved clearance to get around the spring bucket. With 80° of articulation in the upgraded ball joint and free pivoting bushings, SPC’s arm gives you maximum droop travel.
Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +1° of caster built into them. Using its patented ball joint design the arm will get you 0° to +4° of caster and ±2° of camber, so you can put your alignmnet angles back to specification.
Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.
On the adjustable ball joint SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.
Do you need replacement cams for the lower control arm? Check out SPC p/n 25445, which will replace corroded cam bolt assemblies.
Front Adjustment range:
Caster: 0.0° to +4.00°
Installation time: .8 hr/side
Required: 1 per axle
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007