Description
If your 2005-2024 Nissan Frontier RWD or 4WD truck needs camber/caster adjustment and more clearance around the front coil bucket, then these Specialty Products Upper Control Arms are your solution. Fix poor tire wear and improve suspension travel with these heavy duty replacement arms. A must have upgrade when lifting your truck.
Please Note: SPC has upgraded their ball joints to a sealed, pre-greased design to increase longevity and durability. You do not need to grease the ball joints during installation.
Front Adjustment range:
Camber: ±2.00°
Caster: -1.0° to +3.00°
Required: 1 per axle
Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC’s adjustable front upper control arms. Featuring a new maintenance free ball joint and xAxis™ bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. SPC’s integrated tubular and cast steel designs provide the strength and durability needed for the most demanding environments. These remove and replace arms are sold in pairs.
Get more droop travel: SPC’s arm has improved clearance to get around the spring bucket. With 80° of articulation in the upgraded ball joint and free pivoting bushings, SPC’s arm gives you maximum droop travel.
Get your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +1° of caster built into them. Using its patented ball joint design the arm will get you 0° to +4° of caster and ±2° of camber, so you can put your alignmnet angles back to specification.
Get your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.
Do you need replacement cams for the lower control arm? Check out SPC p/n 87520, which will replace corroded cam bolt assemblies, or can be used on trucks not equipped with factory cam bolts for the lower control arm. These cams should be used with the upper arm kit to maximize your set-up.
Patent No. US 7,513,514