Description
SPC Performance FRONT Adjustable Upper Control Arms (covers both front wheels) for a Nissan & Infiniti models listed below. These replace the OE front upper control arms and allows you to dial in your suspension angles with SPC’s xAxis™ sealed flex joints. These are especially useful for lowered vehicles and will allow you to correct tire wear and alignment issues caused by out-of-adjustment camber/caster. Adjustment range: Camber: ±3° Caster: ±3°
Compatible Models:
2007-2008 Infiniti G35 Sedan (RWD/AWD)
2008-2013 Infiniti G37 Coupe (RWD/AWD)
2009-2013 Infiniti G37 Sedan (RWD/AWD)
2011-2012 Infiniti G25 (RWD/AWD)
2009-2020 Nissan 370Z
2008-2012 Infiniti EX35 (RWD/AWD)
2013 Infiniti EX37 (RWD/AWD))
2006-2010 Infiniti M4 (RWD/AWD)
2006-2010 Infiniti M35/M45 (RWD/AWD)
2015 Infiniti Q40 (RWD/AWD)
2014-2022 Infiniti Q50 Sedan (RWD/AWD)
2017-2023 Infiniti Q60 (RWD/AWD)
2014-2015 Infiniti Q60 Convertible (RWD/AWD)
2014-2015 Infiniti Q60 Coupe (RWD/AWD)
2014-2017 Infiniti QX50 (RWD/AWD)
Manufacturer Description:
This pair of patent pending adjustable front upper control arms will give ±3° camber and ±3° caster change. SPC arms match the OE design for clearance so you can maximize camber change without fender well interference. The rubber isolated xAxis™ sealed flex joints retain OE bushing values for Noise, Vibration, and Harshness (NVH), while providing the handling qualities of a mono-ball. Optimized geometry and high strength forged steel components make this the strongest adjustable arm on the market today. Whether you want a cambered stance, improved handling, or to minimize tire wear, this is the best arm for you.
• Most camber and caster adjustability on the market
Greater than ±3° Camber and ±3° Caster
• Best clearance of any adjustable control arm
• Turnbuckle adjusters for easy on car alignment
• High strength forged steel components
• Optimized geometry reduces stresses to pure tension and compression for maximized strength and minimized weight
• xAxis™ Sealed Flex Joints with rubber isolation at the inner bushing
• Sealed ball joint with high polished ball for extended wear
Benefits:
• Set your camber and caster where you want it for
Look “Cambered” appearance
Driving style Improved handling and cornering
Tire wear Adjust angles to minimize tire wear
• Up to +4° of camber change without inner fender well contact
• Easy to adjust
• Sealed joints means no corrosion or contamination in the joints
• Retain factory Noise, Vibration, Harshness (NVH) values but gain handling quality of a mono-ball with xAxis™ sealed flex joint isolated by OE style bonded rubber bushing.
2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017