Description
Zone Offroad 6-inch Lift Kit for 2009 – 2013 Dodge Ram 2500/3500 Cummins Diesel 4WD trucks. Includes 4 Zone nitrogen charged gas shocks. Choose between 3.5-inch and 4-inch rear axle diameter versions.
Ready for the big time? Then this is your 6″ Lift Kit. You’ll really stand out from the crown when you clear massive 37″ tires. Get the look and the performance you want. Fits Diesel 4WD 2009 – 2013 Dodge Ram 2500/3500 trucks. You won’t regret it.
FEATURES
100% bolt-on design for easy installation.
High-strength control arm relocation brackets correct suspension geometry and add rigidity.
IMPORTANT NOTES
Check Rear Axle Diameter: This truck was produced using rear axles of differing diameters; measure the diameter of your rear axle to ensure proper kit selection in configuration.
Driveline Notice: Although rare, if you experience front driveline vibration, install the optional transfer case indexing ring.
Fitment: This kit is not designed for dually models, but may me easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution.
Gas models may require modification to the front exhaust crossover pipe on driver side when using the transfer case indexing ring.
Two-piece rear drive shaft? Add a carrier bearing drop kit to reduce post-lift driveline angles and avoid / eliminate driveshaft vibration.
Wheels / Tires: Adding larger-than-stock wheels? Add front bumper spacers to your kit for additional clearance as some wheel / tire combos may not fully clear the bumper’s stock location.
Works on 2013 2500 with 4 link front suspension only. Will not fit 1 Ton Trucks.
37 x 12.5
MAX TIRE SIZE
6″
FRONT LIFT HEIGHT
4″
REAR LIFT HEIGHT
7 hrs
INSTALLATION TIME
QUICK SPECS
Front Lift Height 6″
Rear Lift Height 4″
Front Lift Method Coil Springs
Rear Lift Method Cast Blocks
Lift Type Lift Kit
Wheel Size 17 x 9
Back Spacing 5″
Max Tire Size 37 x 12.5
Wheel Size 2 18 x 9
Back Spacing 2 5″
Max Tire Size 2 37 x 12.5
Wheel Size 3 20 x 9
Back Spacing 3 5″
Max Tire Size 3 37 x 12.5
Finish Powdercoat
Cutting Required No
Accommodates Factory Wheels See Notes
Welding Required No
2009 Dodge Ram 2500 4WD Diesel
2009 Dodge Ram 3500 4WD Diesel
2010 Dodge Ram 2500 4WD Diesel
2010 Dodge Ram 3500 4WD Diesel
2011 Ram 2500 4WD Diesel
2011 Ram 3500 4WD Diesel
2012 Ram 2500 4WD Diesel
2012 Ram 3500 4WD Diesel
2013 Ram 2500 4WD Diesel