Description
Part number 75403-01A, the AMP Research BedStep2, is a frame-mounted, retractable side bed access step designed for 1999–2016 Ford F-250, F-350, F-450, and F-550 Super Duty trucks.
IMPORTANT: AMP Research offers multiple BedStep2 SKUs for Ford Super Duty applications. Verify that 75403-01A matches your specific truck’s year range before ordering, as other part numbers may cover different model year ranges or configurations for the same vehicle line.
PLEASE NOTE: The listing photos are a general representation of the product line and show the steps mounted on different models of trucks. The item received will be the correct part number and specifications for your specific vehicle.
The BedStep2 mounts just behind the cab, forward of the rear wheel, providing a faster, easier, and safer route to access toolboxes, equipment, and cargo in the truck bed. Unlike running boards that run the length of the truck, the BedStep2 positions where it matters most — directly adjacent to the bed — so you are not reaching or climbing over the wheel arch to get to your gear.
The step deploys and retracts with a simple nudge of the foot, requiring no handles, buttons, or tools. When not in use it tucks away out of the path of debris, reducing the risk of damage during off-road use or tight maneuvering. The unit is designed to mount on either side of the truck box, giving flexibility for drivers who keep toolboxes, gooseneck setups, or other equipment on one side of the bed.
High-strength aluminum alloy construction keeps weight low while supporting loads up to 300 pounds. Precision stainless steel pivot pins provide rock-solid stability at the hinge point, and self-lubricating bushings throughout the assembly eliminate the need for ongoing maintenance in all weather conditions. AMP Research backs the BedStep2 with a 3-year/36,000-mile warranty.
- Fitment: 11999–2016 Ford F-250 Super Duty, 1999–2016 Ford F-350 Super Duty, 1999–2016 Ford F-450 Super Duty, 1999–2016 Ford F-550 Super Duty — mounts on either side of the truck box, frame-mounted installation
- Foot-activated deployment and retraction — no handles, buttons, or tools required
- Rated to support loads up to 300 pounds
- High-strength aluminum alloy construction for reduced weight and corrosion resistance
- Precision stainless steel pivot pins for stability at the hinge point
- Self-lubricating, maintenance-free bushings for all-weather performance
- Mounts just behind the cab, forward of the rear wheel — positions directly adjacent to bed cargo area
- Retracts when not in use to minimize exposure to trail debris and road hazards
- Warranty: 3-Year / 36,000-Mile Limited Warranty
- Sold individually
| Part Number | 75403-01A |
| Brand | AMP Research |
| Product Line | BedStep2 |
| Type | Side-Mounted Retractable Bed Access Step |
| Activation | Foot-activated (push to deploy / push to retract) |
| Weight Capacity | 300 lbs |
| Primary Material | High-Strength Aluminum Alloy |
| Pivot Pins | Precision Stainless Steel |
| Bushings | Self-Lubricating (maintenance-free) |
| Mount Location | Frame-mounted, behind cab, forward of rear wheel |
| Side Compatibility | Driver side or passenger side (mounts on either side) |
| Warranty | 3-Year / 36,000-Mile Limited Warranty |
| Vehicle Fitment | 1999–2016 Ford F-250 Super Duty, F-350 Super Duty, F-450 Super Duty, F-550 Super Duty |
Fitment
Part number 75403-01A fits 1999–2016 Ford F-250, F-350, F-450, and F-550 Super Duty trucks, mounting on either side of the truck box using frame attachment points. Refer to the eBay compatibility table to confirm fitment by specific year, cab configuration, and trim level before purchasing.
Note: AMP Research offers multiple BedStep2 SKUs for Ford Super Duty applications. Verify that 75403-01A matches your specific truck’s year range before ordering, as other part numbers may cover different model year ranges or configurations for the same vehicle line.