Baja Designs® Squadron 2.0 Pro/S2 Fog Pocket Kit w/ Upfitter fits 21-26 Bronco 44-0082-UP

This Baja Designs “Pro” fog pocket kit packs a road-legal fog light and a serious off-road setup into the factory fog pockets of the Ford Bronco steel bumper. Each side gets three lights: an S2 SAE for street-legal fog lighting, an S2 Pro in Driving/Combo for wide trail coverage, and a next-generation Squadron 2.0 Pro in Spot for reach down the trail.

The S2 SAE lights run off the factory fog switch and meet SAE J583 fog lamp requirements, with a sharp cutoff that keeps light low in dust, fog, rain and snow. The off-road lights are wired through the included upfitter harness, so they’re controlled by the Bronco’s factory upfitter switches. Each Squadron 2.0 Pro puts out 5,921 lumens, about 21% more than the first-generation Squadron, and adds a 4-pin Deutsch connector, clip-in uService reflectors and a backlight with nine selectable colors.

Why it stands out

• Street-legal S2 SAE fog lights plus Squadron 2.0 Pro and S2 Pro off-road lights in one kit
• Squadron 2.0 Pro: 5,921 lumens per light, nine-color selectable backlight
• Upfitter harness works with the Bronco’s factory auxiliary switches
• Vehicle-specific fog pocket facias and brackets for a factory-style fit
• Backed by Baja Designs’ lifetime limited warranty

Kit includes

• (2x) Squadron 2.0 Pro, Spot, clear lens
• (2x) S2 Pro, Driving/Combo, clear lens
• (2x) S2 SAE fog lights, clear lens
• (2x) Fog pocket facias and vehicle-specific mounting brackets
• Upfitter wiring harness and adapter/splitter harnesses
• All necessary mounting hardware

Fitment

• 2021-2026 Ford Bronco with factory steel bumper
• 2022-2024 Ford Bronco Raptor

Specifications

• Manufacturer: Baja Designs
• Part number: 44-0082-UP (440082UP)
• UPC: 810160468578
• Squadron 2.0 Pro: 5,921 raw lumens, 65 W / 4.7 A (each)
• S2 Pro: 2,245 raw lumens, 23.46 W / 1.7 A (each)
• S2 SAE: 1,210 raw lumens, 12.42 W (each)
• Shipping weight: 15.8 lbs
• Warranty: Lifetime limited warranty

Note: Baja Designs’ SAE lights are not uService serviceable; opening them voids the warranty.

Installation

The kit replaces the factory fog lights in the steel bumper; the SAE lights connect to the factory fog circuit and the upfitter harness connects the off-road lights to the factory upfitter switches. Professional installation is recommended if you are not comfortable working with vehicle wiring.