Baja Designs® Squadron 2.0 Pro/S2 SAE Clear Fog Pocket Kit fits 17-20 Ford Raptor 44-0063

Built for the second-generation Ford F-150 Raptor, this Baja Designs “Pro” fog pocket kit gives you a street-legal fog light and serious off-road output from the factory fog pockets. Each side holds an S2 SAE fog light with a clear lens, a Squadron 2.0 Pro in Driving/Combo and a Squadron 2.0 Pro in Spot.

The S2 SAE lights run off the factory fog switch and meet SAE J583 fog lamp requirements. Their aspheric projector optics put out 1,210 lumens each with a sharp cutoff, which keeps glare down in dust, fog, rain and snow. When you leave the pavement, the four Squadron 2.0 Pro lights run from your factory upfitter switches through the included harnesses. Each one puts out 5,921 lumens, about 21% more than the first-generation Squadron, and adds a 4-pin Deutsch connector, clip-in uService reflectors and an RGB backlight with nine selectable colors.

Why it stands out

• Street-legal S2 SAE fog lights plus four Squadron 2.0 Pro off-road lights
• Squadron 2.0 Pro in both Spot and Driving/Combo for reach and coverage
• Off-road lights run from the Raptor’s factory upfitter switches
• Vehicle-specific brackets for a factory-style fit; no extra parts needed
• Backed by Baja Designs’ lifetime limited warranty

Installed photos are for reference only. They show this kit with Baja Amber S2 SAE fog lights; this kit (44-0063) includes S2 SAE fog lights with a clear lens.

Kit includes

• (2x) S2 SAE fog lights, clear lens
• (2x) Squadron 2.0 Pro, Driving/Combo, clear lens
• (2x) Squadron 2.0 Pro, Spot, clear lens
• (2x) Mounting brackets
• (2x) Upfitter harnesses, dual 4-pin Deutsch with Hi/Low backlight
• (2x) 4-pin Deutsch 5′ extensions
• (2x) 4-pin Deutsch to 2-pin WeaPac adapters
• (2x) Small 4-pin Deutsch 2-light splitters
• All necessary mounting hardware

Fitment

• 2017-2020 Ford F-150 Raptor

Specifications

• Manufacturer: Baja Designs
• Part number: 44-0063 (440063)
• UPC: 810160468363
• Squadron 2.0 Pro: 5,921 raw lumens, 65 W / 4.7 A (each)
• S2 SAE: 1,210 raw lumens, 12.42 W (each)
• Lens: Clear
• Shipping weight: 16.7 lbs
• Warranty: Lifetime limited warranty

Note: Baja Designs’ SAE lights are not uService serviceable; opening them voids the warranty.

Installation

The kit mounts in the Raptor’s factory fog pockets; the SAE lights connect to the factory fog circuit and the included harnesses connect the Squadron 2.0 Pro lights to the factory upfitter switches. Professional installation is recommended if you are not comfortable working with vehicle wiring.