Description
Camburg front upper uniball performance upper control arms UCA for 2000-2006 Toyota Tundra or 2001-2007 Toyota Sequoia. Made in USA. Correct camber and caster on your lifted Tundra/Sequoia, and increase suspension/wheel travel. The high strength 1.00″ FK uniballs are a worthwhile upgrade from the weak factory UCA ball joints. These arms are designed for 1 to 3 inches of lift.
WHAT’S INCLUDED:
Uniball Upper Arms
Hardware Kit
INSTALL NOTES:
With so many variables of wheel size, offset/backspacing, tire size, brands and styles, the amount of lift and specific suspension components, etc., you may need to trim the plastic inner fenders, etc. to eliminate tire rubbing.
MANUFACTURER’S DESCRIPTION
When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper control arms address these issues and more. Replacing the stock ball-joint with a larger 1.00 uni-ball bearing we’re able to gain wheel travel with a part that is considerably stronger and will last longer under extreme conditions. We build more caster and change the camber curve to correct geometry so the vehicle aligns correctly and improves driving characteristics and handling.
Using the latest CAD/CAM engineering software we design these arms to the strictest standards using our FARO laser scan arm to model the OEM parts and frames. Manufactured in-house, we have the tubes CNC laser cut and bent, then are MIG welded in precision fixtures before sending out to be sandblasted and powder-coated. Our in-house CNC machine shop makes all the machined parts including the uniball mis-alignment spacers from heat-treated stainless steel. We pride ourselves in producing the best parts available under our own roof and control.
Increases usable wheel travel
Corrects camber and caster
Eliminates weak factory ball-joints
Thicker .156″ wall round tubing
Laser cut & CNC bent tubes MIG welded
CAD/CAM engineered
Polyurethane frame pivot bushings with grease-able zerk fittings
FK 1.00″ PTFE-lined uniballs pre-installed
Steel gray powder-coating
All necessary hardware included and ready to install
Made in the USA
Designed for 1-3″ of lift
These also fit 2001-2007 Toyota Sequoia’s.