Mads Smarty S2G Touchscreen Power Programmer for 1998.5-2018 Dodge RAM Cummins 5.9L & 6.7L Turbo Diesel. Power levels for 2003-2007 Cummins range from +30HP to +210 HP, and power level gains on the 2007.5-2018 Cummins range from +30HP to +170HP. Increase horsepower, torque, & optimize fuel economy by 2-4 miles per gallon/MPG. Pre-loaded with ready to use (for trucks with factory emissions equipment).
The Commod Module (communication/unlock module) is REQUIRED on 2013-2018 trucks in order for the Smarty Touch to work. The Commod Module also unlocks additional real time tuning features on 2010+ trucks. The Commod Module is not necessary for 1998-2009 trucks.
Note: To enable shift-on-the-fly capabilites for 2010-2018 Cummins 6.7L, you must purchase the Smarty ComMod Communication Module, which unlocks the ECM. We have this part available separately.
Smarty Touch features:
4,3″ Touch Display. Resolution 480 x 272 – 16.3 million colors.
Two devices: Smarty Touch Display and Smarty Touch Controller each with its own CPU. The Display for the graphics & user
interface and the controller for communicating with the ECM.
Twin CPU design. The fastest Display & Tuner on earth!
Fastest display start up in the industry. Just four seconds!
Fastest PID refresh speed in the industry.
Fastest ECM download in the industry, up to three times faster than the competition, a typical ECM update takes 1.5 to 6 minutes,
depending on the model year.
Small micro USB cable connecting the display and the controller for easy installation.
MicroSD card for simple and fast updates (included).
Fully Internet updateable. Updates are always FREE!
MicroSD card can store multiple UDC custom tunes.
Works with any MicroSD FAT file system formatted card.
EGT sensor (optional). Reads accurately up to over 2200°F.
Communication module (optional). Tunes real time parameters and unlocks the MY 2013+ ECMs.
UDC Pro RT software (optional). Customizing tune software with real time parameters. (Requires Communication module for real time
Four dashboards, each configurable with five different gauge layouts.
For details about the dashboard layouts please click here.
Freely configurable gauge(s) range.
Two alarms (high and a low range) can be configured for each PID.
Audible and/or visible alarms can be configured.
Configured ranges are also displayed through colored bars in all digital gauges.
Configurable PID refresh speed.
Each gauge stores/updates and displays the max reached PID value continously.
Recorded max values can be reset at any time.
Customizeable display background.
Adjustable sound feedback for alarms.
Supports over 300 SAE and Proprietary PID’s.
Works on all Dodge Cummins Ram Pickup’s from 1998.5 to present.
CaTCHER software inside with ten power levels.
Selectable performance parameters for fine tuning.
Works with ours UDC and UDC Pro RT (Firmware 1.1.2 or recent is required) custom tuning software (for CR 5.9L and for 6.7L
Can store multiple UDC and UDC Pro RT custom softwares on MicroSD card with dongle purchases. The only limit is the storage
space on the MicroSD card (for CR 5.9L trucks and 6.7L trucks).
ABS tire height updates in just seconds.
Cold weather 3 Cylinder High Idle enabled for 1998.5 – 2002 VP 5.9L trucks.
Not traceable in the stock setting. Smarty Touch leaves no footprint in all 5.9L trucks.
Manual High Idle is enabled in all softwares for CR 5.9L trucks (excluded MY 2003).
Reads Diagnostic Trouble Codes in plain text.
Reliable, it works off your OEM hardware.
Programmable Speed Limiter from 25 to 250 mph.
TNT-R and SSR software for CR 5.9L trucks (Requires unlock code).
RPM and Shift limiters unlocked with TNT-R and SSR softwares.
Power on Demand “PoD” for CR 5.9L and 2007 – 2009 6.7L trucks.
Real time tuning parameters, while engine is running, for CR 6.7L 2010+ trucks (Requires Communication module)
1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018