Description
SCT 40460S GTX 5-inch capacitive glass Touch Screen Performance Tuner for 2003-2019 Ford F250/F350 6.0, 6.4, & 6.7 Powerstroke Diesel. Includes SCT 9817 EGT Probe. Comes with pre-loaded tunes for 2003-2007 Ford Super Duty 6.0L Powerstroke, 2008-2010 Ford Super Duty 6.4L Powerstroke, and 2011-2019 Ford Super Duty 6.7.L Powerstroke. Gain +103 Horsepower and +221 Torque with the 6.7L model! See additional listings for compatibility with other Ford models. See below for performance gains.Package includes: SCT GTX Programmer, EGT (Exhaust Temp) Probe, Suction Cup Window Mount, OBDII to HDMI Cable, Magnetic Cable, and Vehicle Interface Module (VIM).
*CANNOT BE SHIPPED TO CALIFORNIA.
EGT Sensor Kit (Part 9817)
The SCT EGT Sensor Kit allows you to monitor exhaust gas temperatures with your GTX Performance Programmer. This sensor is plug & play and easy to install, featuring a stainless steel EGT probe and is RFI-shielded for accurate monitoring. Exhaust Gas Temperatures can be one of the most important parameters that you need to monitor on your turbocharged engine. It warns the driver of situations that are potentially damaging to the engine, and it can also be used as a guide for optimizing fuel economy. The EGT Sensor Kit comes complete with everything you will need including sensor, signal amplifier, and the analog connector.
*Pre-Loaded with Ready-to-Use Tunes for the above mentioned vehicles, unless otherwise specified.
PRE-LOADED TUNES ARE CALIBRATED FOR STOCK EQUIPMENT. IF VEHICLE HAS SIGNIFICANT MODIFICATIONS, THE TUNES WILL NOT WORK.
Dyno Tested Power Gains for 2016 6.7L F250/F350 Turbo Diesel:
+103 Horsepower, +221 Torque (Performance Tune)
+87 Horsepower, +188 Torque (Street Tune)
Dyno Tested Power Gains for 2017-2019 6.7L F250/F350 Turbo Diesel:
+131.91 Horsepower, +210.85 Torque (Performance Tune)
+91.86 Horsepower, +148.04 Torque (Street Tune)
+53.15 Horsepower, +85.92 Torque (Tow Tune)
The SCT 9817 EGT Sensor Kit allows you to monitor exhaust gas temperatures with your SCT Devices. Exhaust Gas Temperatures can be one of the most important parameters that you need to monitor on your turbocharged engine. It warns the driver of situations that are potentially damaging to the engine, and it can also be used as a guide for optimizing fuel economy. The EGT Sensor Kit comes complete with everything you will need including sensor, signal amplifier and the Livewire analog connector.
Authorized SCT/Bully Dog Dealer.
**CANNOT BE SHIPPED TO CALIFORNIA.
**ILLEGAL FOR USE ON POLLUTION CONTROLLED VEHICLES IN THE STATE OF CALIFORNIA**
THIS IS A HIGH PERFORMANCE PRODUCT. USE AT YOUR OWN RISK. The Buyer assumes full responsibility for the proper installation and application of the Product. The Buyer assumes all risk and liability for loss, damage, or injury to persons or property of Buyer or others that might be attributed to the use of the product. The Buyer is responsible to obey all applicable federal, state, and local laws, statutes, and ordinances when operating his/her vehicle, and the Buyer agrees to hold Seller harmless from any violation thereof. Consult your vehicle warranty before using this Product. Under no circumstances will the Seller be liable for the voidance of the Buyer’s vehicle warranty. The Buyer assumes all risk and responsibility if an automotive manufacturer and/or dealer voids the Buyer’s vehicle warranty due to use of this Product.
Manufacturer Info:
WHAT YOU CAN ADJUST
*Adjustable Options vary for each vehicle and are not available on all vehicles
Idle Adjust
Enable and select a value for Engine Idle position. This is a great feature for keeping voltage in the vehicle up while running auxiliary electronics off of the vehicle’s power system.
Intake Airbox
Allows an aftermarket intake to be run on the vehicle without a Check Engine Light. For Intake Kits that require tuning, this will provide a selection of available intake kits.
Rev Limiter
Regulate the highest RPM that an engine can reach before the engine is electronically limited. Increasing the RPM limit is recommended only for racing purposes. Once of the most important ways to protect your engine from damage is to keep the RPMs from going too high.
Speed Limiter
Change the top speed that the vehicle will reach before the engine automatically limits the power needed to go faster.
Transmission
Shift Firmness
Change the shift firmness of an automatic transmission.
Bully Dog’s GTX is performance tuning, reimagined – no computers necessary. It’s the easiest-to-use tuner on the market, loaded with powerful features and our most advanced hardware to-date. The new GTX Performance Programmer starts up in under 10 seconds and is super-responsive, sporting a 5-inch capacitive glass touch screen that rivals today’s smartphones. Along with the ability to hold 20 custom tunes, GTX comes preloaded with multiple Bully Dog tuning levels. GTX is also the premier data monitoring solution, giving drivers the ability to monitor the industry’s most extensive list of PIDS, or engine parameters, on an easy-to-use device. Its high-resolution customizable gauges and WiFi connectivity add to the truly unparalleled user experience.
Drivers can log vehicle performance data as they drive, and play it back later using Bully Dog’s free LiveLink software. GTX also gives users greater insight into their truck by reading out and clearing Diagnostic Trouble Codes (DTCs). GTX’s unique grab n’ go magnetic mounting system allows the device to be kept front-and-center while driving, and then quickly stowed away when not in use. Finally, for those who want to take their truck to the next level, GTX can receive custom tunes via WiFi from any of Bully Dog’s custom tuning dealers around the country.
NEXT GENERATION PERFORMANCE TUNING
GTX delivers street-tested, dyno-proven tune files developed by Bully Dog’s expert calibrators to unlock your vehicle’s true potential. Select from multiple Bully Dog tuning levels or load up to 20 custom tunes files from one of our thousands of custom tuning dealers worldwide. Direct-to-device updates and tune delivery over WiFi means cables and computers are a thing of the past.
DIAGNOSTICS & DATALOGGING
The lightning-fast GTX gives drivers the ability to monitor the industry’s most extensive PIDS, or engine parameters, in real time. The device’s data logging capability makes it easy to record vehicle performance at 35 frames per second and play it back with Bully Dog’s free LiveLink software. GTX also doubles as a diagnostic tool with the ability to read and clear diagnostic trouble codes saving drivers a trip to the dealership. Further customize your GTX by adding additional sensors, using the integrated FireWire input.
OUR MOST ADVANCED TOUCH SCREEN
Bully Dog’s 5” capacitive glass touchscreen is the first of its kind. Graphics and gauges are displayed in brilliant HD color, rivaling today’s smartphones. GTX starts up incredibly fast (even when remote starting the vehicle), and provides an ultra-responsive user experience. A fully customizable user interface means your perfect gauge layout is available at the touch of the screen. GTX comes standard with a convenient “grab and go” magnetic mounting system, enabling drivers to keep their device front and center–and then stowed away in seconds.