Description
SCT Performance® X4™ 7015 Programmer and Monitor for 1999-2019 F250 F350 Ford Super Duty Trucks with 6.0L, 6.4L, 6.7L, and 7.3L Turbo Diesel Powerstroke V8 engines. Also compatible with 2011-2016 6.2L V8 Gas, 1999-2010 5.4L V8 Gas, and 1999-2010 6.8L V10 Gas. The factory program on every Super Duty PCM comes with limitations on horsepower, torque, top speed limit, rev limit and other caps put in place by the vehicle manufacturer. SCT’s handheld X4 flash programmer will allow you to unlock extra power and remove limitations by backing up your truck’s factory file, and writing an enhanced program with more aggressive power curves. Each octane-based pre-loaded tune level is engineered for maximum power and efficiency, giving you more opportunity to utilize the maximum capabilities of your Super Duty’s engine and drivetrain.
Peak Performance Gains:
2017- 2019 Ford Super Duty 6.7L Diesel: +131 HP, +210 TQ
2016 Ford Super Duty 6.7L Diesel: +103 HP, +221 TQ
Compatible Trucks Include:
Ford F-250 Super Duty 6.7 Diesel: 2011-2019
Ford F-350 Super Duty 6.7 Diesel: 2011-2019
Ford F-250 Super Duty 6.4 Diesel: 2008-2010
Ford F-350 Super Duty 6.4 Diesel: 2008-2010
Ford F-250 Super Duty 6.0 Diesel: 2003-2007
Ford F-350 Super Duty 6.0 Diesel: 2008-2007
Ford F-450 Super Duty 6.0 Diesel: 2003-2007
Ford F-550 Super Duty 6.0 Diesel: 2008-2007
Ford F-250 / F-350 6.2 Gas V8: 2011-2016
Ford F-250 / F-350 6.8 V10 Gas: 1999-2010
Ford F-250 / F-350 5.4 V8 Gas: 1999-2010
IMPORTANT: The Pre-loaded tunes WILL NOT WORK with significant engine/exhaust modifications (with the exception of air intakes/catback exhausts), or if factory engine/exhaust components have been removed. If your vehicle has check engine lights and/or removed factory components, the pre-loaded tunes may not work. The pre-loaded files on this device are calibrated specifically for stock engine/transmission/exhaust equipment (cat-back/filter-back exhausts & air intakes are fine and will not cause issues, unless they have set off a check engine light).
Authorized SCT/Bully Dog Reseller.
From the Manufacturer
Vehicle Data Overload
With a HUGE Backlit display, the SCT X4 Power Flash makes it EASY to read the Real Time Vehicle Data, view popular sensor data such as EGT, Air / Fuel Ratio or any other 0-5 Volt source!
Big Power. Small Package
The X4 Power Flash arrives Pre-Loaded with DYNO Proven tune files that INCREASE HORSEPOWER and TORQUE
Data Logging
Need to monitor your vehicle’s engine parameters? No need for a separate monitoring device. View & record your vehicle’s PCM data on the device or on a PC.
Dual Analog Inputs
Monitor EGT temps, air-fuel ratio and other popular sensor data.
Easy Restoration Back to Stock
The device backs up your factory PCM program during installation should you ever need to return your vehicle to the stock program. Restoring your vehicle to the stock PCM program is as easy as selecting “Return to Stock” from the device men…
Full Color Backlit LCD Display
Full Color LCD display for easy viewing, day or night.
Increases Horsepower & Torque!
Increases your vehicles Horsepower, Torque, Throttle Response and even Fuel Mileage
Installs Quickly & Easily
Installs quickly & easily via your vehicle’s OBDII port.
Most Popular Vehicles Supported
Most popular Ford vehicles supported including 2014 models.
Stores 10 Custom Tunes
Stores up to 10 custom tune files created by your local SCT Custom Tuning Dealer.
USB Interface Cable Included
USB Interface Cable & Livelink Datalogging software included
User Adjustable Vehicle Parameters
Adjust for common performance bolt-ons such as Cold Air Kits, Exhaust Systems & Gears
WHAT YOU CAN ADJUST
*Adjustable Options vary for each vehicle and are not available on all vehicles (please message us to confirm which options are available on your vehicle).
Axle Ratio
Correct the vehicle speedometer (and fuel efficiency calculations) if you have changed the gear ratio on your vehicle. If no gear ration modifications have been made to the vehicle, then choose the stock setting when the tuner prompts you to choose a gear ratio. This will ensure that no modifications are made to the stock program.
Fan Control
Lowers the Temperature at which the Fan turns on.
Front Mounted Intercooler
Adjusts for the usage of a front mounted intercooler
Fuel Injectors
Allows you to adjust for different sized fuel injectors.
Global Spark
Allows addition or removal of timing across all RPM ranges
Grill Shutter
Adjusts calibration to compensate for removal of Grill Shutter
Idle Adjust
Enable and select a value for Engine Idle position. This is a great feature for keeping voltage in the vehicle up while running auxiliary electronics off of the vehicle’s power system.
Intake Airbox
Allows an aftermarket intake to be run on the vehicle without a Check Engine Light. For Intake Kits that require tuning, this will provide a selection of available intake kits.
Jake Brake
Used as an exhaust brake to increase engine braking while coasting towing heavier loads. Helps lower brake temperatures.
Lock in 1-2-3
Locks the converter in 1st, 2nd and 3rd. Aids in engine braking, increases fuel economy, and can be used for drag racing as well.
Locked At CT
Keeps the torque converter locked during deceleration to aid in engine braking. This is less aggressive than the Jake Brake file so it may be ideal for smaller loads. It can be used in conjunction with the Jake Brake as well.
Mass Air Meter (MAF)
Allows you to select from different aftermarket MAF (Mass Air Meters).
Pedal Response
Rev Limiter
Regulate the highest RPM that an engine can reach before the engine is electronically limited. Increasing the RPM limit is recommended only for racing purposes. One of the most important ways to protect your engine from damage is to keep the RPMs from going too high.
RPM Based Spark
Allows you to Add or Remove Timing by RPM Range. (0-2000)(2000-4000)(4000-8000)
Shift Assist
Sound Symposer
Enable and Disable The Sound Symposer
Speed Limiter
Change the top speed that the vehicle will reach before the engine automatically limits the power needed to go faster.
Super Charger Pulley
Supports aftermarket super charger pulley sizes.
Take Off Assist
Throttle Body
Compensates for aftermarket Throttle Bodies (BBK 65/85/90 MM)
Tire Size
Correct the speedometer if you have changed your tire size from stock.
Torque Reduction
Reduce torque durning shifting (makes shift more firm)
Traction Control
Allows you to disable the vehicles Traction Control without using the button in the vehicle.
Transmission Shift Firmness
Change the shift firmness of an automatic transmission.
Transmission Shift Points
Change the RPMs at which an automatic transmission will change gears.
SCT® X4 Programmer Tuner for Ford F250 F350 5.4 6.0 6.2 6.4 6.7 7.3
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Lariat, King Ranch, Limited, XLT, Platinum, XL, FX4, Harley-Davidson,
Crew Cab, Regular Cab, Extended Cab, Cab & Chassis, Pickup, 2-Door, 4-Door